26
ابريلElevators: manufacturing, installation and even development
Elevators, we are used to using them in our daily lives, but have you thought about the mechanism of elevator work, and what are the methods and steps for manufacturing, installing, maintaining and developing elevators?
But while there are positives to elevators; Which is represented in the ease of access, and the lack of effort and time in using the stairs, but it has drawbacks; This is in the event of a manufacturing defect, or failure to resort to certified and reliable companies.
Especially because it is related to human life, and therefore Ajyad Elevators Company provides you with a variety of services in this regard; From elevator installation, maintenance, repair and development, we will discuss them later in this article.
The process of manufacturing and installing elevators
Elevator services are many and varied, and they start from the process of manufacturing the elevator parts itself, and then installation services. Elevators need regular and continuous maintenance procedures for more safety for users. Here are some details of elevator manufacturing, installation, maintenance and development services.
The installation of the elevator requires trained technicians and skilled workers, as the latest equipment is used to facilitate the installation process, whatever the type of elevator, and the purpose of its installation; Whether it is an elevator that transports passengers, goods, or others, and the installation services are as follows:
Preview before installation
Pre-installation inspection service, by visiting the building, examining its size, number of floors, and purpose used; Whether transporting people or goods, and then choosing the appropriate type of elevator, determining the full cost with a plan, items for installation, and the time it takes.
How to install the elevator
After the preview, the actual work begins; So that the designs and drawings that have been identified are implemented, starting with the guides and elevator doors on all floors, and then the cabins and their contents. Then the elevator control panel is installed from the inside and on each floor, in order to call the elevator on any floor during the use process, and to connect the control panel and electrical circuits.
After examining the installation site and raising the dimensions of the place, and then determining the size of the cabin, engineering drawings are then drawn up with accurate measurements for the elevator.
Initially, doors are installed on each floor, until all floors are completed, and then motion guides are installed. And then determine the location of the upper drag cabin, which is responsible for lifting the elevator, whether at the top of the elevator or in a separate room.
Then install the bottom of the cab, then the sides, fix the cab well, install the ropes, connect them to the counterweight, and then the traction machine.
After determining the size and weight of the elevator bottom supports, they are installed one by one. Installing and programming the main control board, whether inside the elevator or outside on each floor at the door of the elevator from the outside, and then connecting the electrical circuits.
Elevator experiments
This step is very important, among the services of manufacturing, installing, maintaining and developing elevators, which is doing actual experiments on the ground, making sure that there are no problems or defects, and ensuring the safety and security of the elevator after its installation and programming, after which the actual operation process takes place, and makes it available to passengers or users.
Post-installation services
It doesn't end once the lift is delivered and tested; Therefore, the elevator must be monitored, and any complaint should be followed up and dealt with immediately.
Elevator maintenance services
In order to ensure the efficient operation of elevators, and the absence of the need for spare parts for it, you need periodic maintenance on an ongoing basis, in order to check faults, deal with them and maintain them immediately.
The maintenance process is carried out by examining the electrical circuit of the elevator, and maintaining it on a monthly basis, as it is responsible for stopping the elevator between floors. This causes the passenger to panic, and he is unable to get out of the elevator, because the door stops opening, because he is not directly in front of the door, and maintenance is carried out for both the slide switches and the stopping device.
Elevator buttons must also be maintained, ensuring that each button is compatible with the role registered for it, and if incompatibility occurs, periodic maintenance of the electronic board is required here. This is in addition to maintaining the wires of the electronic board, and making sure that they are connected properly, as well as programming the electronic board, and this requires reprogramming.
In addition to maintenance, and solving the problem of increasing or decreasing the power source from the specified amount inside the keyboard. Consequently, the elevator stopped moving, whether going up or down, and here the matter is related to the fuses and inevitably needs to be replaced.
The lifting ropes must also be maintained periodically, ensuring their integrity, and the absence of any problems such as corrosion or otherwise, so as not to cause the ropes to break, the elevator to fall, and loss of life.
It also requires inspection and maintenance; The problem of elevators vibrating during ascent or descent, so as not to cause users to become dizzy, which may lead to fainting.
The movement of the elevator requires friction, and therefore it needs continuous lubrication and lubrication of the wires and some other parts of the elevator. This is during the periodic maintenance process, so as not to damage some parts, and the customer is forced to spend large sums of money in order to purchase and install spare parts to replace the damaged ones.
Elevator safety tests
The goal of making and using elevators is one; It is to facilitate and speed the transportation process, but the types of elevators themselves are different depending on the function. There is a type dedicated to transporting goods, and another to transport residents in real estate, as well as elevators for patients. Others for food transportation, panoramic elevators, hydraulic elevators, but all types of elevators need safety tests.
Security tests include; Ensuring the safety of the function of not dropping orders, because when an error occurs in this feature, the doors may open in the absence of the elevator, and thus losses may occur.
Also, balance quality checks should be done; Where it works on balancing during the process of transporting passengers. It is also necessary to test the electric and mechanical canopy; To ensure the speed of access and landing.